An object-parameter approach to predicting unknown data in incomplete fuzzy soft sets

Incomplete data in soft sets lead to uncertainty and inaccuracy in representing and handling information. This paper introduces notions of complete distance between two objects and relative dominance degree between two parameters. Based on both the notions, an object-parameter method is proposed to predict unknown data in incomplete fuzzy soft sets. The proposal makes full use of known data, including the information from the relationship between known values of all objects on a certain parameter and the information from the relationship between known values of an object on all parameters. The effectiveness of the proposal is verified by many examples under the compared investigation of classical predicted methods.     

Application of topological degree theory to semi-definite complementarity problem

The topological degree theory is applied to study the problem of existence of solutions to the semi-definite complementarity problem (SDCP). A notion of an exceptional family of matrices is introduced, and assertions of a non-strict alternative type are obtained. Namely, for a continuous mapping, there exists at least one of the following two items: either a solution to the SDCP, or an exceptional family of matrices. Hence, if there is no exceptional family, then at least one solution exists     

不同光场二阶相干度的实验研究

基于Hanbury Brown-Twiss(HBT)实验,我们借助于两个单光子计数模块,一个50/50分束器和一个快速计数卡(FastCom-P7888)研究了不同光场的二阶相干度。我们首先制备了脉冲相干光,连续相干光以及单原子发出的单光子源,并测量这几种不同光场的二阶相干度g(2)(τ)。我们通过测量俘获在磁光阱(MOT)和远失谐偶极阱(FORT)中的单原子在近共振连续激光激发下所辐射的荧光的二阶相干度,分别得到了g(2)(τ=0)=0.08和g(2)(τ=0)=0.09,借助于实验中产生的脉冲光与单原子,接下来我们将进行触发式单光子源的实验研究。     

Minimum vertex degree conditions for loose Hamilton cycles in 3-uniform hypergraphs

We investigate minimum vertex degree conditions for 3-uniform hypergraphs which ensure the existence of loose Hamilton cycles. A loose Hamilton cycle is a spanning cycle in which only consecutive edges intersect and these intersections consist of precisely one vertex.     

不同变质程度煤的高分辨率透射电镜分析

利用高分辨率透射电子显微镜(HRTEM)分析了三种不同变质程度煤样的结构特征。基于傅里叶-反傅里叶变换方法,并结合Matlab、Arcgis和Auto CAD软件,通过图像分析技术,获得了HRTEM照片的晶格条纹参数。结果表明,三种煤样的晶格条纹呈现不同特征,按条纹长度分别归属于1×1-8×8共计八个类型。以3×3为临界点,在1×1和2×2中,ML-8中芳香层片的比例高于DP-4和XM-3;在3×3-8×8中,ML-8中芳香层片的比例低于DP-4和XM-3。对比HRTEM和XRD参数d002发现,随着镜质组反射率的增加d002都呈现递减趋势。     

甲醇乳化柴油分散特性的研究

利用显微摄像技术及算术统计的方法表征了甲醇乳化柴油分散相-甲醇的平均粒径。研究了甲醇乳化柴油分散相（甲醇）的粒径分布随高速分散器转子转速、乳化时间、乳化剂用量和甲醇的质量分数等参数的变化。结果表明,甲醇乳化柴油分散相的平均粒径随转速、乳化剂用量的增加而减小,但随甲醇含量的增加而增大;当乳化时间为2min和转子转速为5×2800r/min,乳化剂的质量分数为5%和甲醇的质量分数为10%时,甲醇乳化柴油中分散相存在最佳的分散度,其值为16μm。
     

阻尼对空爆荷载等效静载动力系数的影响

为考查阻尼参数对空爆荷载等效静载动力系数的影响,理论推导了空爆荷载下结构等效单自由体系弹塑性位移解及延性比解,设计并计算了阻尼比0.000 1～0.1、延性比1～4的20种典型工况的动力系数,并与现行抗爆设计规范动力系数公式结果进行了对比。结果表明:阻尼比小于0.000 1时可基本代表无阻尼状态,阻尼比0.01的动力系数比无阻尼的最大降低幅度为2.08%,数值差异很小,因此阻尼比为0.01以内时,可忽略阻尼对动力系数的影响;阻尼比0.05的动力系数比无阻尼的降低幅度约9.92%,数值差异较大,认为阻尼比0.05以上时将具有明显的经济效益;现行设计规范动力系数更适用于柔性结构体系,运用于刚性结构抗爆设计时,计算误差较大,对阻尼比较小的结构设计更不利。     

基于支座反力影响线曲率差分的等截面连续梁损伤识别方法

为了实现仅采用损伤状态信息对等截面连续梁进行损伤识别,通过推导三跨不等跨连续梁在移动荷载作用下的支座反力影响线,发现支座反力影响线求曲率并作差分后的曲线在损伤位置会发生突变,基于该现象提出了一种损伤定位方法,进一步建立了损伤程度计算方法,可对损伤程度进行较精确的定量。通过一三跨连续梁和一四跨连续梁工程实例的仿真分析,证明了支座反力影响线曲率差分指标损伤定位和相应的损伤程度定量方法对等截面连续梁损伤识别具有可行性。